DSpace/Dipòsit Manakin

Low-cost printed antennas design in the band of 2,4GHz

Low-cost printed antennas design in the band of 2,4GHz
 
Martí i Puig, Pere ; Serra i Serra, Moisès ; Carrabina, Jordi
2005

Text complet d'aquest document

Icon
Nom: artconlli_a2005_marti_puig_low_cost_printed.pdf
Mida: 131.2Kb
Format: PDF
Descripció: Només accés a administradors
Enllaç permanent: http://hdl.handle.net/10854/3843
 
Versió de l'editor: https://doi.org/10.1117/12.608840
 

Resum:

In this article we present a study and the corresponding implementation of low cost printed antennas in the 2,4GHz band. These antennas work with low cost transceivers that give a FR input/output signal in the band of interest. The work is part of a project in the field of sensor networks using technology such as Zigbee or even ...»»»»
In this article we present a study and the corresponding implementation of low cost printed antennas in the 2,4GHz band. These antennas work with low cost transceivers that give a FR input/output signal in the band of interest. The work is part of a project in the field of sensor networks using technology such as Zigbee or even simpler and cheaper systems. We have focused our attention on parameters such as the antenna impedance, which is very important for achieving maximum power transfer with the transceiver while avoiding adaptation circuits. We are also interested in avoiding balums. We have analyzed these printed antennas in terms of their efficiency and radiation pattern using electromagnetic simulation software. Two structures have been evaluated and compared. The first is a structure derived from a monopole and slot antenna and the second is a printed patch antenna.^^^^

Tipus:

Capítol o part de llibre

Drets:

Tots els drets reservats

Citació Bibliogràfica:

MARTI PUIG, Pere; SERRA SERRA, Moisès; CARRABINA, J. Low-cost printed antennas design in the band of 2,4GHz. Seville, SPAIN. BELLINGHAM; 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA: SPIE-INT SOC OPTICAL ENGINEERING, 2005.